Skip to main content
Abrisham Gypsum

AB-PM

Abrisham Polymer Gips — Machine-applied

Up to 100 m² a day.

Nearest dealerBulk inquiry
Abrisham Polymer Gips — Machine-applied
AB-PM30 kg

What it is

A lightweight single-coat spray plaster for plastering machines, replacing the gypsum-and-soil and finish coats on cement block, brick and porous concrete. Far faster than traditional plastering. Supplied in 30 kg bags.

Best for

  • Towers and large projects
  • Tunnel-form structures
  • Skipping the cement render on block and clay brick

Not for

  • Small repairs
  • Exterior facades

Features

  1. 01

    Up to 100 m² applied per day

  2. 02

    Fire class A1 and moisture-resistant

  3. 03

    Lighter than traditional plaster; practically no waste

Technical specifications

Values measured under standard laboratory conditions.

※ Sample data — replace with lab-verified values before launch.

Request technical data sheet
Initial setting time
50‎–‎60
Final setting time
140‎–‎150
Residue on 0.2 mm sieve
≤ 5
Whiteness
≥ 85
Compressive strength
≥ 2
Water / plaster ratio
0.55‎–‎0.65
Consumption per m² (1 mm thick)
0.9
Bag weight
30
Shelf life
6
Standard
ISIRI 12015‎-‎1
Abrisham Base Coat (Dual-use)
Abrisham Micronized (Finishing)
Super Ipek
Abrisham Satin Gips
Abrisham Polymer Gips — Hand-applied
Abrisham Polymer Gips — Machine-applied
Abrisham Beton Gips (Concrete Bond)
Abrisham Mastic Putty (Painter's Putty)
Abrisham Micronized — Export Grade
0306090120150180210240
Initial setting time Final setting time(min)

How to use

  1. 1

    Set the machine water ratio and test-spray the first few metres.

  2. 2

    Spray to an even thickness (up to 50 mm).

  3. 3

    Screed flat and finish within about 60 minutes.

Compare with other products

The current product is highlighted.

Compare with other products
AB-DKAbrisham Base Coat (Dual-use)AB-MCAbrisham Micronized (Finishing)AB-IPSuper IpekAB-STAbrisham Satin GipsAB-PHAbrisham Polymer Gips — Hand-appliedAB-PMAbrisham Polymer Gips — Machine-appliedAB-BGAbrisham Beton Gips (Concrete Bond)AB-MSAbrisham Mastic Putty (Painter's Putty)AB-MXAbrisham Micronized — Export Grade
Main useBase coatFinishingCornices & mouldingSkim & paint prepBase coatLarge projects by machineOn concrete & foamSkim & paint prepFinishing
Initial setting time (min)6‎–‎128‎–‎128‎–‎15120‎–‎15050‎–‎6050‎–‎60120‎–‎15060‎–‎908‎–‎12
Final setting time (min)12‎–‎2512‎–‎2523‎–‎30150‎–‎180140‎–‎150140‎–‎150150‎–‎180180‎–‎24012‎–‎25
Residue on 0.2 mm sieve (%)≤ 5≤ 3≤ 1≤ 1≤ 5≤ 5≤ 5≤ 0.5≤ 3
Whiteness (%)≥ 90≥ 90≥ 90≥ 90≥ 85≥ 85≥ 80≥ 92≥ 90
Compressive strength (MPa)≥ 18≥ 15≥ 15≥ 2≥ 2≥ 2≥ 6≥ 2≥ 15
Water / plaster ratio (L/kg)0.6‎–‎0.70.65‎–‎0.70.65‎–‎0.750.65‎–‎0.70.55‎–‎0.650.55‎–‎0.650.5‎–‎0.60.4‎–‎0.50.65‎–‎0.7
Consumption per m² (1 mm thick) (kg/m²)10.90.910.90.9110.9
Bag weight (kg)25‎/‎3025‎/‎3025303030302530

How do I get it?

Frequently asked

Is a gypsum-and-soil coat needed?
No. Polymer Gips replaces both the gypsum-and-soil coat and the finish coat in a single layer.

Articles

Product finderCall

Abrisham Assistant