AB-BG

Abrisham Beton Gips (Concrete Bond)

The bonding coat for concrete, smooth surfaces and foam.

AB-BG30 kg

What it is

A primary coat on concrete, smooth surfaces and polystyrene foam before plastering. With very high adhesion it is the bridging layer for finishing over concrete, cement and foam, and it also serves as mortar for precast gypsum blocks and AAC (Hebel) blocks.

Best for

Concrete and smooth surfaces before plastering
Polystyrene foam
Mortar for gypsum and AAC blocks

Not for

Final finishing coats

Features

01
Very high adhesion
02
Compressive strength ≥ 6 N/mm² (measured ≥ 11)
03
Flexural strength ≥ 2 N/mm² (measured ≥ 6)

Technical specifications

Values measured under standard laboratory conditions.

※ Sample data — replace with lab-verified values before launch.

Request technical data sheet

Initial setting time: 120‎–‎150; min
Final setting time: 150‎–‎180; min
Residue on 0.2 mm sieve: ≤ 5; %
Whiteness: ≥ 80; %
Compressive strength: ≥ 6; MPa
Water / plaster ratio: 0.5‎–‎0.6; L/kg
Consumption per m² (1 mm thick): 1; kg/m²
Bag weight: 30; kg
Shelf life: 6; months
Standard: ISIRI 12015‎-‎1

Abrisham Base Coat (Dual-use)

Abrisham Micronized (Finishing)

Super Ipek

Abrisham Satin Gips

Abrisham Polymer Gips — Hand-applied

Abrisham Polymer Gips — Machine-applied

Abrisham Beton Gips (Concrete Bond)

Abrisham Mastic Putty (Painter's Putty)

Abrisham Micronized — Export Grade

0306090120150180210240

Initial setting time Final setting time(min)

How to use

1
Clean form oil and dust off the concrete.
2
Mix the mortar — you have about 30 minutes of working time.
3
Apply a thin, keyed coat so the next plaster coat can grip it.

Compare with other products

The current product is highlighted.

Compare with other products
	AB-DKAbrisham Base Coat (Dual-use)	AB-MCAbrisham Micronized (Finishing)	AB-IPSuper Ipek	AB-STAbrisham Satin Gips	AB-PHAbrisham Polymer Gips — Hand-applied	AB-PMAbrisham Polymer Gips — Machine-applied	AB-BGAbrisham Beton Gips (Concrete Bond)	AB-MSAbrisham Mastic Putty (Painter's Putty)	AB-MXAbrisham Micronized — Export Grade
Main use	Base coat	Finishing	Cornices & moulding	Skim & paint prep	Base coat	Large projects by machine	On concrete & foam	Skim & paint prep	Finishing
Initial setting time (min)	6‎–‎12	8‎–‎12	8‎–‎15	120‎–‎150	50‎–‎60	50‎–‎60	120‎–‎150	60‎–‎90	8‎–‎12
Final setting time (min)	12‎–‎25	12‎–‎25	23‎–‎30	150‎–‎180	140‎–‎150	140‎–‎150	150‎–‎180	180‎–‎240	12‎–‎25
Residue on 0.2 mm sieve (%)	≤ 5	≤ 3	≤ 1	≤ 1	≤ 5	≤ 5	≤ 5	≤ 0.5	≤ 3
Whiteness (%)	≥ 90	≥ 90	≥ 90	≥ 90	≥ 85	≥ 85	≥ 80	≥ 92	≥ 90
Compressive strength (MPa)	≥ 18	≥ 15	≥ 15	≥ 2	≥ 2	≥ 2	≥ 6	≥ 2	≥ 15
Water / plaster ratio (L/kg)	0.6‎–‎0.7	0.65‎–‎0.7	0.65‎–‎0.75	0.65‎–‎0.7	0.55‎–‎0.65	0.55‎–‎0.65	0.5‎–‎0.6	0.4‎–‎0.5	0.65‎–‎0.7
Consumption per m² (1 mm thick) (kg/m²)	1	0.9	0.9	1	0.9	0.9	1	1	0.9
Bag weight (kg)	25‎/‎30	25‎/‎30	25	30	30	30	30	25	30

How do I get it?

Frequently asked

Can I finish-coat directly on concrete?

Ordinary plaster doesn't bond well to smooth concrete. Apply a coat of Beton Gips first, then finish.