AB-PH

Abrisham Polymer Gips — Hand-applied

One coat instead of base and finish.

AB-PH30 kg

What it is

A lightweight single-coat plaster that replaces the gypsum-and-soil and finish coats on cement block, brick and porous concrete. Mixed in a wide bucket or tub and applied by hand, it saves time and cost. Supplied in 30 kg bags.

Best for

Clay and cement-block walls, with no cement render
All-concrete structures, especially tunnel-form
Toilets and bathrooms

Not for

Exterior facades

Features

01
Fire class A1 (non-combustible)
02
Resists moisture and scratching
03
Up to 50 mm thick; each bag covers about 3.3 m² at 10 mm

Technical specifications

Values measured under standard laboratory conditions.

※ Sample data — replace with lab-verified values before launch.

Request technical data sheet

Initial setting time: 50‎–‎60; min
Final setting time: 140‎–‎150; min
Residue on 0.2 mm sieve: ≤ 5; %
Whiteness: ≥ 85; %
Compressive strength: ≥ 2; MPa
Water / plaster ratio: 0.55‎–‎0.65; L/kg
Consumption per m² (1 mm thick): 0.9; kg/m²
Bag weight: 30; kg
Shelf life: 6; months
Standard: ISIRI 12015‎-‎1

Abrisham Base Coat (Dual-use)

Abrisham Micronized (Finishing)

Super Ipek

Abrisham Satin Gips

Abrisham Polymer Gips — Hand-applied

Abrisham Polymer Gips — Machine-applied

Abrisham Beton Gips (Concrete Bond)

Abrisham Mastic Putty (Painter's Putty)

Abrisham Micronized — Export Grade

0306090120150180210240

Initial setting time Final setting time(min)

How to use

1
Clean the surface — no cement render is needed on block or brick.
2
Mix in a wide bucket or tub.
3
Apply and screed in one coat up to 50 mm; you have about 60 minutes to finish.

Compare with other products

The current product is highlighted.

Compare with other products
	AB-DKAbrisham Base Coat (Dual-use)	AB-MCAbrisham Micronized (Finishing)	AB-IPSuper Ipek	AB-STAbrisham Satin Gips	AB-PHAbrisham Polymer Gips — Hand-applied	AB-PMAbrisham Polymer Gips — Machine-applied	AB-BGAbrisham Beton Gips (Concrete Bond)	AB-MSAbrisham Mastic Putty (Painter's Putty)	AB-MXAbrisham Micronized — Export Grade
Main use	Base coat	Finishing	Cornices & moulding	Skim & paint prep	Base coat	Large projects by machine	On concrete & foam	Skim & paint prep	Finishing
Initial setting time (min)	6‎–‎12	8‎–‎12	8‎–‎15	120‎–‎150	50‎–‎60	50‎–‎60	120‎–‎150	60‎–‎90	8‎–‎12
Final setting time (min)	12‎–‎25	12‎–‎25	23‎–‎30	150‎–‎180	140‎–‎150	140‎–‎150	150‎–‎180	180‎–‎240	12‎–‎25
Residue on 0.2 mm sieve (%)	≤ 5	≤ 3	≤ 1	≤ 1	≤ 5	≤ 5	≤ 5	≤ 0.5	≤ 3
Whiteness (%)	≥ 90	≥ 90	≥ 90	≥ 90	≥ 85	≥ 85	≥ 80	≥ 92	≥ 90
Compressive strength (MPa)	≥ 18	≥ 15	≥ 15	≥ 2	≥ 2	≥ 2	≥ 6	≥ 2	≥ 15
Water / plaster ratio (L/kg)	0.6‎–‎0.7	0.65‎–‎0.7	0.65‎–‎0.75	0.65‎–‎0.7	0.55‎–‎0.65	0.55‎–‎0.65	0.5‎–‎0.6	0.4‎–‎0.5	0.65‎–‎0.7
Consumption per m² (1 mm thick) (kg/m²)	1	0.9	0.9	1	0.9	0.9	1	1	0.9
Bag weight (kg)	25‎/‎30	25‎/‎30	25	30	30	30	30	25	30

How do I get it?

Frequently asked

How much plaster per square metre?

About 9 kg per m² at 1 cm thick; a 30 kg bag covers about 3.3 m² at 10 mm.

Articles

Machine or hand plaster? A guide for contractors