AB-ST

Abrisham Satin Gips

A smooth final coat, with no waste.

AB-ST30 kg

What it is

A processed plaster with additives for the final coat and polishing of plastered surfaces. Its long set stops mortar going to waste, and its particular grading leaves a smooth, polished surface ready for any paint or wallpaper.

Best for

Final coat over plasterwork
Surfaces under paint and wallpaper

Not for

Base coats and thick layers

Features

01
90 minutes of working time
02
Higher coverage than other plasters; density 750 kg/m³
03
Very easy to polish, no waste

Technical specifications

Values measured under standard laboratory conditions.

※ Sample data — replace with lab-verified values before launch.

Request technical data sheet

Initial setting time: 120‎–‎150; min
Final setting time: 150‎–‎180; min
Residue on 0.2 mm sieve: ≤ 1; %
Whiteness: ≥ 90; %
Compressive strength: ≥ 2; MPa
Water / plaster ratio: 0.65‎–‎0.7; L/kg
Consumption per m² (1 mm thick): 1; kg/m²
Bag weight: 30; kg
Shelf life: 6; months
Standard: ISIRI 12015‎-‎1

Abrisham Base Coat (Dual-use)

Abrisham Micronized (Finishing)

Super Ipek

Abrisham Satin Gips

Abrisham Polymer Gips — Hand-applied

Abrisham Polymer Gips — Machine-applied

Abrisham Beton Gips (Concrete Bond)

Abrisham Mastic Putty (Painter's Putty)

Abrisham Micronized — Export Grade

0306090120150180210240

Initial setting time Final setting time(min)

How to use

1
Use 6.5–7 litres of water for every 10 kg of plaster, in a clean bucket.
2
Sprinkle the plaster onto the water and mix until smooth.
3
Apply thinly — about 1 kg per m² per mm of thickness.
4
Polish with a steel trowel to a smooth finish.

Compare with other products

The current product is highlighted.

Compare with other products
	AB-DKAbrisham Base Coat (Dual-use)	AB-MCAbrisham Micronized (Finishing)	AB-IPSuper Ipek	AB-STAbrisham Satin Gips	AB-PHAbrisham Polymer Gips — Hand-applied	AB-PMAbrisham Polymer Gips — Machine-applied	AB-BGAbrisham Beton Gips (Concrete Bond)	AB-MSAbrisham Mastic Putty (Painter's Putty)	AB-MXAbrisham Micronized — Export Grade
Main use	Base coat	Finishing	Cornices & moulding	Skim & paint prep	Base coat	Large projects by machine	On concrete & foam	Skim & paint prep	Finishing
Initial setting time (min)	6‎–‎12	8‎–‎12	8‎–‎15	120‎–‎150	50‎–‎60	50‎–‎60	120‎–‎150	60‎–‎90	8‎–‎12
Final setting time (min)	12‎–‎25	12‎–‎25	23‎–‎30	150‎–‎180	140‎–‎150	140‎–‎150	150‎–‎180	180‎–‎240	12‎–‎25
Residue on 0.2 mm sieve (%)	≤ 5	≤ 3	≤ 1	≤ 1	≤ 5	≤ 5	≤ 5	≤ 0.5	≤ 3
Whiteness (%)	≥ 90	≥ 90	≥ 90	≥ 90	≥ 85	≥ 85	≥ 80	≥ 92	≥ 90
Compressive strength (MPa)	≥ 18	≥ 15	≥ 15	≥ 2	≥ 2	≥ 2	≥ 6	≥ 2	≥ 15
Water / plaster ratio (L/kg)	0.6‎–‎0.7	0.65‎–‎0.7	0.65‎–‎0.75	0.65‎–‎0.7	0.55‎–‎0.65	0.55‎–‎0.65	0.5‎–‎0.6	0.4‎–‎0.5	0.65‎–‎0.7
Consumption per m² (1 mm thick) (kg/m²)	1	0.9	0.9	1	0.9	0.9	1	1	0.9
Bag weight (kg)	25‎/‎30	25‎/‎30	25	30	30	30	30	25	30

How do I get it?

Frequently asked

Why is there no waste with Satin Gips?

Its initial set is 120–150 minutes, so mixed mortar doesn't set before you use it.

Articles

Why plaster cracks — and how to prevent it