AB-DK
Abrisham Base Coat (Dual-use)
Base coat for walls and ceilings — sieved, it finishes too.
What it is
The first coat over masonry and for base-coating walls and ceilings. Because it is fully white, once sieved it also works as a finishing plaster. Supplied in 25 and 30 kg bags.
Best for
- Base coats on walls and ceilings
- First coat on brick and block
- Mixing with clay (gypsum-and-soil coats)
Not for
- Final finishing without sieving
- Spray-machine application
Features
- 01
Compressive strength above 18 N/mm²
- 02
Purity and whiteness above 90%
- 03
Mixes easily with clay, minimal waste
Technical specifications
Values measured under standard laboratory conditions.
※ Sample data — replace with lab-verified values before launch.
Request technical data sheet- Initial setting time
- 6–12
- Final setting time
- 12–25
- Residue on 0.2 mm sieve
- ≤ 5
- Whiteness
- ≥ 90
- Compressive strength
- ≥ 18
- Water / plaster ratio
- 0.6–0.7
- Consumption per m² (1 mm thick)
- 1
- Bag weight
- 25/30
- Shelf life
- 6
- Standard
- ISIRI 12015-1
How to use
- 1
Clean dust and oil from the substrate; dampen it slightly in hot weather.
- 2
Sprinkle plaster onto the water (not water onto plaster) and mix small batches — initial set is 6–12 minutes.
- 3
Apply and screed before final set.
- 4
For use as a finish coat, sieve the plaster before mixing.
Compare with other products
The current product is highlighted.
How do I get it?
- Nearest dealerChoose a province and city.
- Bulk inquiryTell us the approximate quantity and project city; we'll send price and delivery time.
- How much do I need?Enter area and thickness to see the approximate quantity and number of bags.
- Request technical data sheetWe'll send the technical data sheet and certificates.